Archivos de la categoría Exchanger

FixedFloat | Exchange USDT (ERC-20) to XRP

EXCHANGE USDT (ERC-20) TO XRP

What do you need to know?

  • ­The average time of the exchange of USDT to XRP — from 1 to 2 minutes
  • ­Only 4 confirmations of the USDT are needed to complete the exchange
  • ­Do not send USDT through a third party contract! Such transactions are not automatically processed. We accept transactions from the original USDT contract
  • ­Destination tag is the payment ID in Ripple. If you need it when sending a transaction, be sure to include it
  • ­If this is your first time using a Ripple account, you need to activate it. To do this, you need to send at least 20 XRP

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

Brief Information on USDT (ERC-20)

Tether (USDT) was created by Tether Limited in 2014. The developers were able to qualitatively implement a curious idea — to combine a real-life currency and blockchain technology. As a result, the USDT stablecoin appeared — its rate is almost always equal to 1 US dollar.

In 2018, USDT was released on the Ethereum blockchain using the ERC-20 protocol. This made Tether compatible with decentralized apps, dramatically increased transaction speed, and dramatically reduced fees. At this time, Tether on the ETH blockchain is the most popular among users.

USDT smart contract

Do not submit USDT through a third party contract. Our exchanger does not accept transactions that are sent by third party smart contracts, except for the original USDT contract.

Network fee

To work with tokens, the wallet must have ETH. It is very difficult to calculate the exact amount of ETH to send a transaction. During periods of high load, it can change significantly. Each token can have a different transaction value. Therefore, it is better that the amount of ETH on the wallet is slightly higher than the average fee on the network at the moment. The average commission can be estimated using the Blockchair analytical service.

The system does not see the transaction, what should I do?

If you have sent funds, but there are no changes, check your transaction in an explorer (etherscan.io or blockchair.com) and make sure that the transaction was created.

If the transaction has already been added to the blockchain, and the system has not seen it, contact technical support, we will be able to help you promptly.

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

XRP at a glance

Ripple is a blockchain-like payment system launched by OpenCoin Inc in 2012 that focuses on non-chargeback currency exchanges.

Ripple works not only with cryptocurrencies, but also fiat currencies and commodities. That being said, it is worth highlighting the difference in the names of Ripple and XRP. Until recently, an equal sign was put between these two names. Now, Ripple is the name of the company, and XRP is the internal cryptocurrency of the Ripple network.

Ripple account activation

If this is your first time using a Ripple account, you need to activate it. To activate a Ripple account, you need to send at least 20 XRP to it, which are frozen forever. This stock is attributed to spam protection. The purpose of the fees is to protect the network from DoS attacks, making them too expensive for hackers.

What if the Destination tag was not specified when needed?

Destination tag is the payment ID in Ripple and other coins. Many services have protection on addresses, which does not allow transactions without a tag.

If it happened that you forgot to specify the tag or specified it incorrectly:

  1. Check if the transaction went through. To do this, you can use the Xrpscan service.
  2. If the transaction is not confirmed, please write to our technical support. We will help you resend it.
  3. If, nevertheless, the transaction went through, then, unfortunately, we will no longer be able to help. In this case, you should write to the technical support service of the service to which you sent it.

Operation speed

The advantage of XRP over competitors is that the speed of financial transactions is almost instantaneous. An interesting feature is that the speed will not be affected by either the price or the Ripple rate, and even the load on the network will not be a problem.

FixedFloat | Exchange USDT (ERC-20) to Monero

EXCHANGE USDT (ERC-20) TO MONERO

What do you need to know?

  • ­The average time of the exchange of USDT to XMR — from 1 to 2 minutes
  • ­Only 4 confirmations of the USDT are needed to complete the exchange
  • ­Do not send USDT through a third party contract! Such transactions are not automatically processed. We accept transactions from the original USDT contract
  • ­If you have not received Monero, try to wait a bit, some wallets see transactions with a delay. Rebooting a Monero wallet sometimes helps. If all else fails, contact us for technical support

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

Brief Information on USDT (ERC-20)

Tether (USDT) was created by Tether Limited in 2014. The developers were able to qualitatively implement a curious idea — to combine a real-life currency and blockchain technology. As a result, the USDT stablecoin appeared — its rate is almost always equal to 1 US dollar.

In 2018, USDT was released on the Ethereum blockchain using the ERC-20 protocol. This made Tether compatible with decentralized apps, dramatically increased transaction speed, and dramatically reduced fees. At this time, Tether on the ETH blockchain is the most popular among users.

USDT smart contract

Do not submit USDT through a third party contract. Our exchanger does not accept transactions that are sent by third party smart contracts, except for the original USDT contract.

Network fee

To work with tokens, the wallet must have ETH. It is very difficult to calculate the exact amount of ETH to send a transaction. During periods of high load, it can change significantly. Each token can have a different transaction value. Therefore, it is better that the amount of ETH on the wallet is slightly higher than the average fee on the network at the moment. The average commission can be estimated using the Blockchair analytical service.

The system does not see the transaction, what should I do?

If you have sent funds, but there are no changes, check your transaction in an explorer (etherscan.io or blockchair.com) and make sure that the transaction was created.

If the transaction has already been added to the blockchain, and the system has not seen it, contact technical support, we will be able to help you promptly.

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

Monero is the most anonymous cryptocurrency

Monero runs on the CryptoNote algorithm, unlike public blockchains (e.g. Bitcoin, Ethereum etc.), when sending it, you can not see the sender, the recipient, or even the amount that was sent. This is possible due to the use of Ring Signatures and Stealth Addresses technologies.

What to do if you did not receive Monero after the exchange?

First, make sure that the order contains data about the transaction sent. In case there is no transaction data, try to wait a bit or contact technical support. Due to the fact that in the Monero network updates from November 30 at the protocol level, funds are blocked until 10 network confirmations are received, delays in payment may sometimes occur.

Secondly, check the synchronization of your Monero wallet. The last block in the wallet should correspond to the number indicated on the MoneroHash website in the «Blockchain Height» field of the «Network» block. If not, try restarting your wallet.

If the order contains the data of the transaction we sent, the wallet is synchronized, but the transaction is not visible in the wallet, contact technical support to request a private viewing key to decrypt the transaction and confirm the sending of funds.

When can I use the resulting Monero?

As mentioned above, in the Monero network updates dated November 30 at the protocol level, funds are blocked until 10 network confirmations are received. That is, until the transaction receives 10 confirmations, it will not be possible to use the funds received. On average, a transaction receives 10 confirmations within 20 minutes.

Transaction processing speed

The average block release time is about two minutes. But sometimes delays do occur, and the block exit time can take 10-20 minutes.

FixedFloat | Exchange USDT (ERC-20) to Stellar Lumens

EXCHANGE USDT (ERC-20) TO STELLAR LUMENS

What do you need to know?

  • ­The average time of the exchange of USDT to XLM — from 1 to 2 minutes
  • ­Only 4 confirmations of the USDT are needed to complete the exchange
  • ­Do not send USDT through a third party contract! Such transactions are not automatically processed. We accept transactions from the original USDT contract
  • ­Memo is the XLM payment ID. If you need it when sending a transaction, be sure to include it
  • ­If this is your first time using a Stellar Lumens account, you need to activate it. To do this, you need to send at least 1 XLM

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

Brief Information on USDT (ERC-20)

Tether (USDT) was created by Tether Limited in 2014. The developers were able to qualitatively implement a curious idea — to combine a real-life currency and blockchain technology. As a result, the USDT stablecoin appeared — its rate is almost always equal to 1 US dollar.

In 2018, USDT was released on the Ethereum blockchain using the ERC-20 protocol. This made Tether compatible with decentralized apps, dramatically increased transaction speed, and dramatically reduced fees. At this time, Tether on the ETH blockchain is the most popular among users.

USDT smart contract

Do not submit USDT through a third party contract. Our exchanger does not accept transactions that are sent by third party smart contracts, except for the original USDT contract.

Network fee

To work with tokens, the wallet must have ETH. It is very difficult to calculate the exact amount of ETH to send a transaction. During periods of high load, it can change significantly. Each token can have a different transaction value. Therefore, it is better that the amount of ETH on the wallet is slightly higher than the average fee on the network at the moment. The average commission can be estimated using the Blockchair analytical service.

The system does not see the transaction, what should I do?

If you have sent funds, but there are no changes, check your transaction in an explorer (etherscan.io or blockchair.com) and make sure that the transaction was created.

If the transaction has already been added to the blockchain, and the system has not seen it, contact technical support, we will be able to help you promptly.

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

A brief history of Stellar Lumens

Stellar is a publicly available decentralized marketplace with various assets in circulation. The platform also has its own open source cryptocurrency Stellar Lumens (XLM).

The currency is based on the Stellar Consensus Protocol (SCP), which is similar in principle to the BFT protocol of the Ripple platform, but has a significant difference — all network validators are equivalent, there are no central control nodes in the blockchain. XLM coin is more decentralized than Ripple, but less decentralized than Proof-Of-Work cryptocurrencies (such as Bitcoin and Ethereum).

Getting started with XLM

If this is your first time using an XLM account, you need to activate it. To do this, you need to send at least 1 XLM to it. As soon as the transfer arrives at your wallet, it will become active. This is done to protect against spam.
To store this currency, you can pay attention to special wallets Solar wallet and Lobstr.

What is a Memo and do I need to specify it?

When sending XLM, there is an additional Memo field. Memo is the ID of the payment. It is unique, and with its help the service identifies the sender and recipient. Many services have address protection, which does not allow transactions without Memo.

If you forgot to specify a Memo or entered it incorrectly, check if the transaction was sent. If the transaction is not sent, please write to our technical support. If the transaction has already been sent, you should write to the technical support service of the service to which you sent it.

Stellar Lumens blockchain speed and fees

XLM is considered to be a fast blockchain. The transaction is confirmed in a few seconds. The commission is very small, on average 0.00001 XLM.

FixedFloat | Exchange USDT (ERC-20) to BitTorrent

EXCHANGE USDT (ERC-20) TO BITTORRENT

What do you need to know?

  • ­The average time of the exchange of USDT to BTT — from 1 to 2 minutes
  • ­Only 4 confirmations of the USDT are needed to complete the exchange
  • ­Do not send USDT through a third party contract! Such transactions are not automatically processed. We accept transactions from the original USDT contract

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

Brief Information on USDT (ERC-20)

Tether (USDT) was created by Tether Limited in 2014. The developers were able to qualitatively implement a curious idea — to combine a real-life currency and blockchain technology. As a result, the USDT stablecoin appeared — its rate is almost always equal to 1 US dollar.

In 2018, USDT was released on the Ethereum blockchain using the ERC-20 protocol. This made Tether compatible with decentralized apps, dramatically increased transaction speed, and dramatically reduced fees. At this time, Tether on the ETH blockchain is the most popular among users.

USDT smart contract

Do not submit USDT through a third party contract. Our exchanger does not accept transactions that are sent by third party smart contracts, except for the original USDT contract.

Network fee

To work with tokens, the wallet must have ETH. It is very difficult to calculate the exact amount of ETH to send a transaction. During periods of high load, it can change significantly. Each token can have a different transaction value. Therefore, it is better that the amount of ETH on the wallet is slightly higher than the average fee on the network at the moment. The average commission can be estimated using the Blockchair analytical service.

The system does not see the transaction, what should I do?

If you have sent funds, but there are no changes, check your transaction in an explorer (etherscan.io or blockchair.com) and make sure that the transaction was created.

If the transaction has already been added to the blockchain, and the system has not seen it, contact technical support, we will be able to help you promptly.

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

A brief history of BitTorrent

BitTorrent is a token based on the TRC10 protocol, which was created in 2019 by the founder of TRON cryptocurrency, Justin Sun. BTT’s goal is to motivate users to maintain network bandwidth. Users who store files on their computers and speed up the network should be rewarded with BTT coins.

Transaction processing speed

The TRON network is capable of processing around 1500 transactions per second. The speed will directly depend on how many users are currently making transfers. On average, it will take up to 3 minutes to confirm your transfer. As the number of active nodes increases, this time may change.

FixedFloat | Exchange Binance Coin to Litecoin

EXCHANGE BINANCE COIN TO LITECOIN

What do you need to know?

  • ­The average time to exchange BNB for LTC is from 1 to 2 minutes
  • ­You need 1 confirmation of the BNB blockchain for the exchange
  • ­No need to enter Memo when sending BNB

=""

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

Binance Coin (BNB) — Binance Exchange Token

The BNB Coin cryptocurrency was released through an ICO that took place in July 2017. As a result, they raised $15 million. Binance Coin was created as an ERC20 token and originally worked on the Ethereum blockchain. But in 2019, the coin «moved» to its own blockchain. The ERC-20 standard is still adopted by the Binance exchange.

What is a Memo and do I need to specify it?

There is an additional Memo field when submitting Binance Coin. Memo is the ID of the payment. It is unique, and with its help the service identifies the sender and recipient.

In our exchanger, when sending BNB you do not need to specify Memo.

Binance Coin Blockchain Speed

An exchange requires 1 confirmation. This operation takes place in a few seconds.

FixedFloat | Instant cryptocurrency exchangefixedfloat.ltd

Litecoin — Bitcoin’s first fork

Litecoin — electronic peer-to-peer cryptocurrency, created in 2011 by a former employee of Google and Charlie Lee, when creating the basis was taken the source code of bitcoin (Litecoin is a fork of Bitcoin). In the crypto community, it is often called «digital silver».

The speed and fees of the Litecoin blockchain

Litecoin is considered to be a fast blockchain, the average block exit time is 2.5 minutes.

Today, the average Litecoin transaction fee is 0.00049 LTC, which is approximately $0.03.